Home › Pool Cage Rescreening
Refresh your aging pool cage with expert pool cage rescreening in Miramar, FL. We remove old, brittle mesh and install new, high quality screen that stands up to sun and storms. Give your enclosure a like new look and restore clear views around your pool.
Miramar Screening provides professional pool cage rescreen throughout Miramar, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (754) 812-9028 or request your free quote.
Pool cage rescreening in Miramar that actually holds up
A pool cage rescreen is more than just swapping out old mesh. In Miramar, the sun, salt in the air, and afternoon storms all beat up your enclosure, so the materials and how they are installed matter if you want it to last.
When Miramar Screening rescreens a pool cage, we start by walking the enclosure with you. We look for torn panels, broken splines, loose doors, rusted screws, bent frame members, and any signs of structural movement from past storms. This lets us tell you if you truly need a full rescreen, a partial rescreen, or screen plus hardware repairs. You get clear options and pricing before any work starts.
In our climate, we typically recommend either standard 18/14 fiberglass screen, a heavier 20/20 “no-see-um” mesh to keep out tiny insects, or a premium polyester screen that handles UV and wind better. For homes closer to the canal or lake, we often lean away from the cheapest fiberglass because it can chalk and get brittle faster in salty, humid air. We keep sample pieces on the truck so you can feel the difference in thickness and visibility before you decide.
How the pool cage rescreen process works, step by step
On rescreen day, our crew sets up ladders and staging so we can safely reach the roof panels and high walls. We move patio furniture and grill equipment away from the cage or cover it so no debris falls on it. If you have fragile pavers or coping, we use protective boards under the ladders to reduce the chance of scuffs.
We first remove the old spline (the rubber cord) and mesh from one section at a time. This keeps your frame from twisting and lets us check each channel for damage. In Miramar, UV exposure often dries out spline long before the screen fails, so we always replace spline with a UV-resistant version sized correctly for your frame. Reusing old spline is a common shortcut in Florida that we will not do.
Next, we clean out the aluminum channels with brushes and compressed air. Dirt and old paint chips left in the groove can cause the new screen to sit unevenly and pull out sooner. After that, we roll new screen across the opening with some extra overhang, tension it evenly in both directions, then press in new spline with a roller tool. This is where skill matters. Too tight, and the panel can bow the frame or tear in the next strong wind. Too loose, and you will see sagging pockets that collect leaves.
We trim excess mesh with sharp blades so there are clean lines around each panel. Roof sections get particular attention since Miramar winds hit them hardest. For large roof spans, we may recommend breaking them up into smaller panels or using a stronger screen so you are not calling us back after the next storm.
Local conditions in Miramar that affect your screen choice and timing
Miramar’s weather plays a big role in how long a pool cage rescreen will last. Our sun is intense nearly year-round, afternoon thunderstorms are common, and hurricane season can bring sudden high winds and flying debris. All of that should shape the choices you make.
If you enjoy evening swimming and have issues with no-see-ums and mosquitoes from nearby lakes or canals, a 20/20 no-see-um mesh is usually worth the slight reduction in airflow compared to standard 18/14. For homeowners who care most about an open view, we might recommend a high-visibility screen on the wall facing the lake or golf course, and a stronger standard mesh on the roof where strength is more important than a crystal-clear view.
Timing matters too. In Miramar, the most comfortable months to have your pool cage rescreened are usually November through April. The humidity is lower, there are fewer afternoon storms, and your deck surface dries faster, which keeps our ladders and boards more stable. We do rescreen year-round, but in mid-summer we often schedule work earlier in the morning or later in the day to avoid lightning-prone hours.
If hurricane season is approaching and your screen is already torn or brittle, it is smart to address it before a storm. Loose and flapping panels can catch wind like a sail and damage the aluminum frame. During your estimate, Miramar Screening will tell you honestly if your frame looks strong enough to keep, or if certain sections should be reinforced while we rescreen.
Pricing, what affects cost, and how to plan your budget
Pool cage rescreen pricing in Miramar depends mostly on four things: the size of your enclosure, the height and complexity of the roof, the screen type you choose, and how much repair work is needed on the frame and hardware.
A simple, single-story cage with a flat or mansard roof is generally straightforward. Taller two-story cages or enclosures built tight into landscaping take more time and require more staging, which increases labor. If your existing frame is in good shape and you only need new mesh and spline, that costs less than a rescreen that also needs new doors, kick plates, or re-secured support braces.
Material choice also matters. Standard fiberglass costs less up front, but in our Miramar climate it may need replacement sooner than a heavier or premium polyester mesh. No-see-um and high-strength screens cost more per square foot, but if you fight constant bugs or have a lot of tree debris blowing in, the extra durability can be worth it over time.
When Miramar Screening gives you a quote, we break out screen type, labor, and any repairs. We can often quote multiple options on the spot, such as “standard rescreen” versus “no-see-um upgrade” or “add pet-resistant panels on the lower walls.” This helps you decide what makes sense for your budget instead of getting one lump price with no explanation. We are also upfront about any permits that might be needed if structural work is required, although a basic rescreen by itself usually does not trigger permitting.
What we check, common issues, and how to get your pool cage ready
A good pool cage rescreen is also a chance to catch small problems before they grow. During our inspection and as we remove the old mesh, we check for loose anchors where the cage meets the deck, separated sealant lines at the house wall, and corrosion around screws. Salt in the air and pool chemicals can rust fasteners, especially on older cages that were not built with coated or stainless hardware.
If we find minor frame issues, Miramar Screening can typically handle them during the same visit. This might include tightening or replacing rusted screws, installing new door closers, adjusting out-of-square doors so they latch correctly, and replacing worn kick plates or bug sweeps at the bottom of the doors. If we see something more serious, like a bent structural member, we let you know if it should be repaired by an aluminum contractor before or during the rescreen.
To get ready for your pool cage rescreen, we ask that you clear as much of the deck as possible. Move furniture, toys, and planters away from the walls, and let us know about any irrigation timers or pool equipment that should not be stepped on or covered. If you have pets, plan to keep them indoors or in another secure area while the doors are off and the screens are open.
When the job is done, we walk the enclosure with you, point out what was replaced, and check door operations together. We also explain how to rinse your new screens with a garden hose to remove salt and dirt, and how to spot early signs of wear so you can get the longest life from your investment in your Miramar pool cage rescreen.
