Home › Screen Installation
Get expert screen installation in Miramar, FL tailored to your home. We install durable, tight fitting enclosures that keep bugs out and airflow in. From patios to pool cages, we handle complete projects with clean workmanship and dependable service.
Miramar Screening provides professional screen installation throughout Miramar, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (754) 812-9028 or request your free quote.
Screen installation in Miramar that is built for real Florida weather
Screen installation in Miramar, FL has to deal with salty air, sun that cooks hardware, sudden wind gusts, and a long rainy season. At Miramar Screening, we design and install screens around those conditions first, then around looks. That is what keeps enclosures tight, doors closing properly, and panels from pulling loose in a storm.
When you call us for screen installation, we start by asking how you actually use the space. A family that swims daily needs different details than a homeowner who just wants to sit on the patio without bugs. We look at pool layout, roof lines, drainage, where the wind hits your yard, and how close neighbors and lakes are. All of that affects frame sizing, screen material, and how we anchor the structure.
We work across Miramar and nearby neighborhoods like Silver Lakes, Riviera Isles, Monarch Lakes, and Sunset Falls, so we are familiar with the common lot layouts and HOA expectations. Many HOAs want the enclosure color to match existing window frames, require certain roof profiles, or restrict overall height. We help you match those rules before you spend money on a design that will not be approved.
Our goal is a screen installation that feels like it belongs to your house, not something tacked on. That means clean tie-ins to the wall, straight lines, tight mitered corners, and tracks that allow doors to glide without you having to slam them. If something in the existing structure is not right, we point it out upfront instead of covering it up, because that will affect how long the new enclosure really lasts.
How our screen installation process works, step by step
Miramar Screening follows a clear process so you know what is happening and when.
1. Site visit and measurements: We walk the area, check concrete condition, slab level, wall finishes, and roof overhangs. We note gutters, downspouts, sprinkler heads, pool equipment, and electrical or gas lines. We take precise measurements so the frame is built to fit your space, not forced to fit on install day.
2. Design and material choices: Based on your yard and budget, we lay out the frame style, roof type (gable, mansard, or flat), door locations, and screen type. For example, if you have a lake behind your home we usually recommend a wide-view panel section across the back with fewer vertical posts. If your yard gets strong east or west sun, we may suggest a tighter mesh on that side for extra shade.
3. Proposal and timeline: We give you a written proposal that lists the aluminum type and gauge, the specific screen mesh, fastener type, door hardware, and any upgrades like kick-plates or pet doors. We also include a reasonable install timeframe based on current workload and weather. In Miramar, we try to avoid pouring new footers when heavy afternoon storms are forecast because it affects curing.
4. Fabrication: We cut and pre-assemble as much as possible off-site. This keeps the time in your yard shorter and improves accuracy. Frames are built to the measurements we took, not generic kit sizes.
5. Installation: On install day, we start with layout and anchors, then set the main frame, then stretch and spline the screen panels. We square and plumb each section, then install doors, closers, and hardware. We seal any necessary joints and address transitions from enclosure to existing house walls.
6. Final check and walkthrough: We test all doors, verify panel tension, and clean up metal shavings and old hardware. We walk the project with you so you can see how to operate doors and understand any maintenance spots, like where leaves tend to collect on roof screens.
Each step ties back to durability. If anchors are wrong or panels are not stretched correctly, the enclosure will start having problems within a year or two. Our process is set up to avoid those shortcuts.
Screen material and frame options that fit Miramar homes
The choices you make on materials have more impact on longevity than almost anything else. Miramar Screening lays out your options plainly so you are not paying for features you do not need, but also not buying the cheapest mesh that will fail quickly in our climate.
Screen mesh options
Standard fiberglass: Good for basic insect control on patios and balconies. It is budget friendly, flexible, and easy to repair, but it can stretch faster if kids or pets push on it.
Polyester and high-strength mesh: This is preferred for pool enclosures and windy yards in Miramar. It holds tension longer, resists tearing, and stands up better to pet claws and storm gusts. It costs more upfront but usually pays off over time with fewer repairs.
No-see-um / fine mesh: If your home backs onto a canal, lake, or marshy area, no-see-ums and tiny biting insects are a real issue. Fine mesh has smaller openings, which cuts airflow a bit but greatly reduces those pests. Many Miramar lakefront homes choose this mesh for sides facing the water and a more open mesh for other walls.
Frame and hardware details
Aluminum framing: We use aluminum sized to your span and exposure, with proper wall thickness for the height and expected wind load. On long walls or tall cages, we recommend heavier members to reduce flex and panel popping.
Fasteners: In coastal South Florida, regular hardware rusts fast. We use corrosion resistant fasteners that hold up better to humidity and salt in the air. This reduces staining on your patio and makes later repairs easier.
Color and style: Typical colors are white and bronze, which most Miramar HOAs accept. We help you choose color based on your roof, window frames, and existing trim so the enclosure looks like it was built with the house. We can discuss decorative kick-plates, privacy bands, and door styles that fit how you use the space.
Local yards and pools are not identical, so we mix and match these options rather than forcing a single package on everyone.
What affects the cost of screen installation in Miramar
Two neighbors in the same subdivision can pay very different prices for screen installation, even if their homes look similar from the street. Miramar Screening explains costs upfront so you understand where your money is going.
Key factors that drive price:
Size and height: A full pool cage that spans the whole deck with a mansard roof uses much more material and labor than a small back porch enclosure. Taller structures require heavier framing, more bracing, and more time to install.
Existing slab or new foundation: If you already have a solid concrete pool deck or patio in good condition, installation is simpler. If the slab is cracked, uneven, too small, or missing, we may need to pour new footers or extend the deck, which adds cost and time.
Mesh type and frame weight: Upgraded screen mesh and heavier aluminum cost more but almost always last longer in Miramar’s weather. We show you the price difference so you can decide if the extra durability is worth it for your situation.
Access and obstacles: Tight side yards, screen work above existing roofs, or yards with utilities and landscaping that must be protected can all slow the job. That extra time is part of the final price.
Permits and HOA approvals: In many cases, a new pool enclosure or major extension requires a permit through Miramar or Broward County, and most gated communities require HOA approval. We can assist with drawings, product information, and contractor documents that the city or HOA may request. Permit fees and any required engineering will be listed as separate line items.
Our quotes are itemized so you can see structure cost, screen upgrade options, doors and hardware, and any repair or prep work. Instead of guessing, you can adjust scope to stay within your budget while still getting a solid installation.
Common problems we prevent and how to keep your screens in shape
Many of the repair calls we answer in Miramar could have been avoided with better original installation. When Miramar Screening installs your enclosure, we build with these common issues in mind.
Loose or baggy panels: Panels that were not properly tensioned or that used undersized spline will sag, flap, and eventually pull out. We match spline size to the frame and mesh type and stretch panels evenly to hold tension over time.
Rusting hardware and stains: Cheap screws rust quickly in South Florida, staining your concrete and weakening the structure. We use appropriate corrosion resistant fasteners and explain where you should occasionally rinse to remove salt and dirt buildup.
Door drag and misalignment: Many homeowners live with doors that do not close right, slam, or drag across the threshold. During installation we square the frame, shim and adjust doors, and set closers so the door latches gently. We also show you the simple adjustments you can make years later as the house settles.
Leaks and drainage issues: An enclosure that is sealed wrong against the house can direct water where it should not go. We pay close attention to gutters, roof drip lines, and existing weep holes so the structure does not trap water against your home. If we see a drainage concern, we bring it up before installation.
Basic care for long life:
Rinse the frame and screen occasionally, especially after storms and during pollen season. Check door closers and latches once or twice a year and call us if you notice screws backing out or panels starting to sag. Do not use harsh chemicals or pressure washers directly on the mesh, which can damage the screen.
With a solid initial installation and a little routine attention, a screen enclosure in Miramar can stay tight, clean, and functional for many years.
